Our Products
Matterhorn Series
The Matterhorn line of products are mountable ionization systems intended to provide cleaner, healthier air to existing HVAC systems. The units operate only when air flow is present, keeping electrical use low while working to protect the air from pollutants and odors.
The size and number of ionization systems needed is dependent upon the system usage, size of the space, and severity of the pollution in the air.
Matterhorn 1000
The Matterhorn 1000 ionization system is intended to be mounted in the supply duct or air handler of a heating, cooling, or ventilating system. The unit is intended to operate only when air flow is present, thus, power to the ionization unit should be interlocked with fan operation, or controlled via an air pressure switch. The size and number of ionization systems is dependent upon the airflow, size of the space , and severity of the pollution and odors. Ionization can be adjusted with a knob.
Air Flow Capacity: Up to 2,500 CFM
Rated Voltage: 120 VAC
Frequency: 50/60 Hz
Power Consumption: 5 Watts
Current Draw: 0.2 Amps (200 mA)
Estimated Tube Life: 17,600 hours (two-years)
Matterhorn 1002
The Matterhorn 1002 ionization system is intended to be mounted in the supply duct or air handler of a heating, cooling, or ventilating system. The unit is intended to operate only when air flow is present, thus, power to the ionization unit should be interlocked with fan operation, or controlled via an air pressure switch. The size and number of ionization systems is dependent upon the airflow, size of the space , and severity of the pollution and odors. Ionization can be adjusted with a knob.
Air Flow Capacity: Up to 5,000 CFM
Rated Voltage: 120 VAC
Frequency: 50/60 Hz
Power Consumption: 6 Watts
Current Draw: 0.4 Amps (400 mA)
Estimated Tube Life: 17,600 hours (two-years)
Matterhorn 880
The Matterhorn 880 ionization system is intended to be mounted in the supply duct or air handler of a heating, cooling, or ventilating system. The unit is intended to operate only when air flow is present, thus, power to the ionization unit should be interlocked with fan operation, or controlled via an air pressure switch. The size and number of ionization systems is dependent upon the airflow, size of the space , and severity of the pollution and odors. Ionization can be adjusted with a knob.
Air Flow Capacity: Up to 2,500 CFM
Rated Voltage: 240 VAC
Frequency: 50/60 Hz
Power Consumption: 5 Watts
Current Draw: 0.2 Amps (200 mA)
Estimated Tube Life: 17,600 hours (two-years)
Matterhorn 882
The Matterhorn 882 ionization system is intended to be mounted in the supply duct or air handler of a heating, cooling, or ventilating system. The unit is intended to operate only when air flow is present, thus, power to the ionization unit should be interlocked with fan operation, or controlled via an air pressure switch. The size and number of ionization systems is dependent upon the airflow, size of the space , and severity of the pollution and odors. Ionization can be adjusted with a knob.
Air Flow Capacity: Up to 5,000 CFM
Rated Voltage: 240 VAC
Frequency: 50/60 Hz
Power Consumption: 6 Watts
Current Draw: 0.4 Amps (400 mA)
Estimated Tube Life: 17,600 hours (two-years)
If you require any further assistance with the Matterhorn Series of products or further information on its capabilities,
please contact our team.